GLOSSARY |
|
|
|
|
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
| - A - |
 ABA
American Bankers Association. Aligning Edge The bottom edge of a check when its face is viewed. Alignment The vertical variation between the bottom edges of adjacent MICR characters. Amount Field The character positions within the MICR line of a check which contains the amount of the check. Amount Symbol Special MICR character used to separate the amount field from the adjacent field. ANSI American National Standards Institute. Auxiliary On-Us Field An optional field to the left of the Routing Field on the MICR line, typically used on commercial checks for the consecutive serial number. Any data printed in this field must be preceded and followed by On-Us Symbols |
| - B - |
|
Batch Header A serially numered process control document that preceeds a batch of items to be entered for processing. BFD Bank of first deposit (of a check). |
| - C - |
|
Character Space/Position CMC-7 Convenience Amount |
| - D - |
|
Dash Symbol Special MICR character sometimes used in the transit or on-us fields of the MICR line. Debossment The sunken impression of a printed character on a paper document caused by impact printing processes that use an excessive amount of pressure to imprint the character. It is not normally a problem in laser printing. The specification is .001 inch from the surface of the document, but .0015 inch debossment is permitted. DIMM An acronym for Dual Inline Memory Module. Like their predecessor SIMMs, DIMMs are small integrated circuit boards that fit into internal slots to add memory to computers or printers. Font DIMMs are used to add fonts to printers as an alternative to font cartridges. Driver A computer file that describes properties of a device (such as a laser printer) to the computer. A cartridge driver provides details about the cartridge fonts so that they can be accessed through applications software. |
| - E - |
|
E-13B The official name of the font used in magnetic ink printing in the United States, Canada and several other countries. Use of the term E-13B generally implies both the character shape as well as the magnetic aspects of the printing. It consists of ten numeric characters and four symbols. See our World MICR Table.  Embossment Printing that is raised above the surface of the paper as in laser printing. Although no formal standard for embossment has been set, the same objective of .001 inch applicable to debossment can be assumed. Encoding The process of imprinting MICR characters on checks, deposits, or other bank documents. Escape Character This is a control code character, corresponding to ASCII decimal code 27 and hexadecimal code 1B, that is used by the laser printer to identify a string of characters as a printer command. When this character is received by the printer, the printer reads it and its associated characters as a command to be performed and not data to be printed. Software applications have different ways of placing the character in the program. External Processing Code Field (EPC Field) A single-digit optional field for special purposes located to the immediate left of the Routing Field on a check. Extraneous Ink Any magnetic ink, other than the printed MICR characters, that is located within the Clear Band. When laser printing MICR documents, care must be taken to assure that no part of text, lines, signatures or other magnetic ink is printed in the Clear Band. |
| - F - |
|
Field A specified portion of the MICR line that is limited to a set of one or more characters that may be treated as a unit of information. Font A set of characters that have similar characteristics. A laser font has an assigned name, typeface, spacing, height, pitch, style, stroke weight, symbol set and orientation. Font Cartridge A small electronic component that is inserted into the appropriate slot of some laser printer models in order to provide additional capabilities such as fonts or macros. See the Font Compatibility Table for a listing of printers with available Font Cartridge slots. Font Height The height of the body of a font’s characters measured in points. It is usually slightly greater than the distance from the bottom of a lower-case descender to the top of an unaccented capital letter. |
| - G - |
|
Grain The direction of the fibers in a sheet of paper. Fibers in long grain papers run parallel to the long dimension of the cut sheet. In short grain papers they run parallel with the short side. Long grain paper is generally preferred for laser check printing. |
| - H - |
|
Home Bank The bank from which a check (or other MICR document) has been drawn upon. |
| - I - |
|
ISO International Organization for Standardization. |
| - L - |
|
Landscape Landscape orientation refers to printing across the length of the page, as opposed to portrait orientation which prints across the width of the page. Leading Edge The right edge of a check when its face is viewed. Legal Amount The value of the check expressed in text. If this value differs from the convenience amount, the legal amount prevails. Logo The name of a company or product in a special design used as a trademark in advertising. |
| - M - |
|
Macro A series of laser printer escape code sequences, control codes and data whose execution can be initiated with a single printer command. Magnetic Ink Usually printer's ink to which iron oxide particles have been added. In regard to MICR laser printing, it refers to toner with magnetic characteristics. Magnetic Ink Character Recognition A system used to enable electronic and visual reading of information on a check. The E-13B font is used in the United States, Canada and other countries for MICR check encoding. France and several other countries use the CMC-7 font. For more information see our World MICR Table. MICR Acronym for Magnetic Ink Character Recognition. It consists of magnetic ink printed characters that can be recognized by high-speed magnetic and/or optical recognition equipment. MICR Line The .25-inch high region centered in the clear band that contains the E-13B MICR characters. |
| - O - |
|
OCR Optical Character Recognition. A technique for reading a font optically. The font can be an OCR font, the E-13B, or others depending on the capabilities of the hardware. OCR may refer to the technique, the machine, or any aspect related to the technique or machine. On-Us Field A data field in the MICR line on a check reserved for bank use which usually includes the account number, an optional processing code and, on personal checks, the serial number. An On-Us Symbol usually appears to the right of the account number. On-Us Symbol Special MICR character used in the On-Us field and Auxiliary On-Us field. Optical Character Recognition (OCR) Machine reading by optical means of printed, human readable characters (as opposed to optical mark or bar code reading). Orientation The direction of printed characters on a page. Portrait orientation refers to print across the width of a page. Landscape orientation refers to print across the length of a page. |
| - P - |
|
Pantograph A printed pattern of a logo or art creating a decorative background. Usually intended as an anti-alteration security feature in a check. Paper Dust Particles of loose paper fibers and other residues which naturally accumulate inside printers. Controlling paper dust is a serious issue for Laser Printers in terms of print quality and printer performance. Pitch The number of characters in a font that can be printed in a horizontal inch. Pitch only applies to fixed-space fonts. The E-13B font pitch is 10 characters per inch. Point A measurement of font height approximately equal to 1/72nd inch. Portrait Refers to the printing across the width of a page (letter style). This is the opposite of landscape orientation, which is printing across the length of the page. Pre-encoding Amount field encoding of deposited items prior to their receipt by a bank. Print Density The relative darkness of print on the page which affects the amount of magnetic ink applied to a page. Laser printer density settings are controlled either mechanically (wheel or slide bar) or through printer menu selection. |
| - R - |
|
Reader/Sorter High-speed automated paper handling machines that can recognize magnetic ink characters printed in E-13B or compatible fonts. The reading is done through recognition of the waveform of the character, its magnetic pattern, its visual structure, or a combination of these techniques. Read Head The sensing device in reader/sorters that picks up the magnetic signals of E-13B characters. These are converted into electrical pulses and subsequently interpreted by the reader/sorter's processor. Registration The printing of variable data so that it fits correctly into areas provided for it on preprinted forms. Routing (or Transit) Field Positions 33 through 43 of the MICR line used for the Routing Number, bracketed on both sides by Transit Symbols. Routing (or Transit) Number The numeric identifier of a particular financial institution. It is printed in the Routing Field on checks. Routing or Transit Symbol Special MICR character used exclusively in the Routing (or Transit) Field. |
| - S - |
|
Safety Paper Highly calendered bond paper having a surface design and/or hidden warning indicator to identify any attempt at fraudulent alteration. Serial Number Often used to refer to the sequential check or document number found in the Auxiliary On-Us Field of commercial checks and the On-Us Field of personal checks. Signal Level/Strength The amplitude of the voltage wave form produced when a DC magnetized MICR character is scanned by a magnetic reading head. The relative signal level from any printed MICR character may vary from 50% to 200% of its nominal signal level. Also called "signal strength". SIMM An acronym for Single Inline Memory Module. SIMMs are small integrated circuit boards that fit into internal slots to add memory to computers or printers. Font SIMMs are used to add fonts to printers as an alternative to font cartridges. Skew The amount of variation from vertical of a MICR character with respect to the bottom edge of the document, measured in degrees. It is not normally a problem in laser printing. The maximum allowable skew is 1.5°. Spacing Fonts have either fixed or proportional spacing. Fixed-spaced fonts have constant inter-character spacing. Character spacing in proportionally-spaced fonts varies with the shape of the character. Stroke Weight A description of the thickness of the strokes that compose characters in a font. Bold, medium and light are examples of stroke weights. Style The angularity of the characters in a font. Upright and italic are examples of style. Symbol An E-13B character separating the fields or separating digits within a field. The four E-13B symbols are Amount, On-Us, Transit, and Dash. In the CMC-7 font the five symbols are named S-1 through S-5. Symbol Set A unique collection and ordering of all the characters available in a font. Most symbol sets are designed for a specific type of application. For example, the E-13B MICR symbol set contains only the numerals 0 through 9 and the four special symbols used for encoding MICR on checks. |
| - T - |
|
Trailing Edge The left edge of a check when its face is viewed. Transit Number The unique identifying number assigned by the ABA to each US bank. It appears in the upper right-hand corner of checks as the numerator (upper portion) of a fraction. Transit Number Field See Routing Field. Typeface A unique name which identifies the set of physical and conceptual characteristics on which a font’s design is based. |
| - V - |
|
ValuePort microMICR's versatile font device which attaches to the laser printer parallel port. It is compatible with a wide variety of printers. Void Absence of ink or toner within the specified outline of a printed MICR character. Void Pantograph A pantograph that produces the word "void" or other warning when a copy of the original check is made. |
| - W - |
|
Waveshape A MICR character’s unique "magnetic footprint" composed of the peaks and valleys of the magnetic wave form produced when the character is scanned by a magnetic reading head. It is the basis for electronic recognition of MICR characters. Write Head The device in reader/sorters that magnetizes the ink printed in the clear band area of a MICR document. |
• Direct
comments to: